- Contact Person : Mr. Dai Yonghong
- Company Name : Eddysun (Xiamen) Electronic Co., Ltd.
- Tel : 0592-2223833-13606015133
- Fax : 0086-592-2237091
- Address : Fujian,Xiamen,Floor 7, No.23, Wanghai Road, Software Park
- Country/Region : China
- Zip : 361008
EUT-108w 8-channel digital ultrasonic inspection detector
EUT-108w 8-channel digital ultrasonic inspection detector
EUT-108w is a kind of high-performance 8-channel digital ultrasonic flaw detector. It uses the most advanced astronautics electronic technology and the multi-CPU system design concept to ensure the consistency, stability, reliability and the anti-interference ability of the equipment. It is developed with high sensitivity, high resolution and high fidelity of echo transmission. This equipment can work continuously for 24 hours.
EUT-108w is consist of 8-channel ultrasonic transmitting and receiving units, digital motherboard and power supply. The setting, operation and display of the equipment are all controlled by computer. It can be used conveniently for single-channel and multi-channel on-site ultrasonic inspection.
The high speed CPU used for EUT-108w has the advantages of high precision, high speed and complete functions. The software is independently developed by our company. It is easy to operate and can be updated freely according to the customers' requirements.
TECHNICAL PERFORMANCE
Model | EUT-108w 8-channel digital ultrasonic inspection detector |
Type | Digital ultrasonic inspection detector |
Technical Parameters | 1. Transmitted pulse: sharp pulse amplitude ≥500V, rise time of front edge tr≤15ns 2. Frequency range: 0.5 ~ 15MHz, adjustable between narrowband and broadband of hardware or according to customers’ requirements. There’re two special hardware/software narrowband filters in 2 ~ 4MHz / 4 ~ 6MHz designed for application on site. 3. Pulse repetition frequency (PRF): 25Hz~10KHz, adjustable among 25/50/100/200/500/1K/2K/5K/10KHz. The maximum PRF of each channel is 10KHz when each four channels work circularly. 4. Detection range: continuously tunable from 0 ~ 5000mm (longitudinal wave in steel), the minimum display range is 5mm 5. D-Delay (Pulse shift): -10 ~ 1000mm (longitudinal wave in steel) 6. P-Delay (Probe delay): 0 ~ 200 us 7. Material velocity: 1000 ~ 15000 m/s 8. Gain: 0 ~ 110 dB with step of 0.5/2/6dB 9. Fine tuning of gain: -2 ~ +6dB with step of 0.1dB 10. Attenuation error: not more than ±0.1dB for every 2dB 11. Vertical linear error: ≤3%, Horizontal linear error: ≤0.5% 12. Inspection sensitivity margin: ≥63dB 13. Reject: 0 ~ 80%, linear reject 14. Damping: 50/500Ω 15. Sampling rate: 200MHz 16. Optional measuring point: front edge or peak value 17. Gate: a/b/c/d four independent warning gates, besides the positive/negtive alarm functions, gate a is designed with the function of tracking and gate d with the function of bottom wave reject 18. Echo evaluation: optional modes such as sound path, horizontal distance, vertical distance, echo amplitude etc. 19. Storage: be able to store datas and parameters 20. Interface: network port, USB port, I/O port, ground port etc. 21. Power supply: AC power supply between 100 ~ 240 V 22. Other funntions: first echo tracking and various settings for anti-interference on the spot |
Application | EUT-108w can be extended to other multi-channel equipment whose channel number is a multiple of 4, such as 8/12/16/24/32 etc., so it’s appropriate for automatic or semi-automatic ultrasonic inspection on steel tubes, rods and ingots, especially for steel tube whose thickness is more than 100mm. By adjusting the frequency range, this equipment can be used for high-speed automatic inspection for small-bore thin wall tubes. |
ON-SITE VIEW
EUT-108w 8-channel digital ultrasonic inspection detector
